Chip Resetter for Epson Cartridges

Resets the chip on most Epson 7 pin and  9 pin chipped cartridges.
Will now reset T0711/12/13/14, T0801/2/3/4/5/6.
Resets our compatibles and genuine Epson cartridges.
Reset to gain extra prints or reset to refill.
Just place over the chip and wait for the green light !
Comes with battery installed and is ready to use.
Lasts for around 100 resets.
PLEASE READ IMPORTANT NOTES BEFORE PURCHASE

This resetter will reset genuine Epson cartridges with the following part numbers. It will also reset our compatible equivalents but please make sure that you fully read the important notes before you purchase.

If you are not sure then please contact us for advice.

T007, T008, T009, T017, T018, T026, T027, T028, T029, T036, T037, T040, T041, T066, T067, T0321, T0331, T0332, T0333, T0334, T0335, T0336, T0341, T0342, T0343, T0344, T0345, T0346, T0347, T0348, T0422, T0423, T0424, T0441, T0442, T0443, T0444, T0481, T0482, T0483, T0484, T0485, T0486, T0540, T0541, T0542, T0543, T0544, T0547, T0548, T0549, T0551, T0552, T0553, T0554, T0611, T0612, T0613, T0614, T0711, T0712, T0713, T0714, T0801, T0802, T0803, T0804, T0805, T0806, T0807

This resetter is designed to reset both the older 7 pin chipped cartridges and the newer T0711/2/3/4 and T0801/2/3/4/5/6 cartridges which have 9 contact pins. It will reset both genuine Epson and our compatibles but we cannot guarantee that it will reset other brands of compatible cartridge. Please see the compatibility list to make sure that your cartridge part numbers are supported.

This resetter will generally reset supported older 7 pin Epson cartridges without issue but please make sure that you read the following points if you intend to reset the newer genuine Epson 9 pin cartridges.

When resetting chips on genuine Epson T0711, T0712, T0713, T0714, T0801, T0802, T0803, T0804, T0805 & T0806 cartridges you will need to reset your cartridges before the ink level goes below around 40% and you will also need to refrain from tipping the cartridges on their side once removed. This is because, on the new genuine Epson cartridges, there is a sensor behind the chip that is always immersed in the ink. If the cartridge is empty, low or if it is tipped on its side then air will have reached the internal sensor which it will render the cartridge permanently unrecognisable after resetting. By resetting the cartridge at above 40% ink and keeping it level you will keep the sensor immersed in ink and therefore stop the cartridge from being rejected.
Our compatible cartridges do not have such a sensor and can be reset when empty or at any point in between.

Genuine and compatible chips can usually be reset many times but as they are manufactured with the intention of being used only once, we cannot guarantee any cartridges or chips beyond their intended single use life span.

This resetter WILL NOT reset the new Epson T1281/2/3/4/5 (FOX) & T1291/2/3/4/5 (APPLE) cartridges. If you require a resetter for these then please click here.