Chip Resetter for Epson T1281/2/3/4/5 & T1291/2/3/4 Cartridges
- IMPORTANT NOTES
Resets the chip on Epson Fox and Apple ink cartridges.
Resets ink levels on Epson T1281, T1282, T1283, T1284, T1285
Resets ink levels on Epson T1291, T1292, T1293, T1294, T1295
Resets genuine Epson and most brands of compatible cartridges.*
Reset to gain extra prints or reset to refill.
Just place over the chip and wait for the green light !
Comes with battery installed and is ready to use.
Lasts for around 100 resets.
*PLEASE READ IMPORTANT NOTES BEFORE PURCHASE
This resetter will reset genuine Epson cartridges with the part numbers
below. These cartridges are also known as Fox & Apple cartridges due to the pictures on their boxes.
It will also reset our compatible equivalents but please make sure that you fully read the important notes before you purchase.
The above cartridges
are generally found in the following printers:
Epson Stylus BX305F/BX305FW/BX305FW PLUS
Epson Stylus B425WD
Epson Stylus BX525WD/BX535WD/BX625FWD/BX635FWD/BX935FWD
Epson Sytlus BX305F/BX305FW/BX320FW/BX925FWD
Epson Stylus S22
Epson Stylus SX125/SX130/SX235W/SX420W/SX425W/SX435W/SX445W
Epson Stylus SX525WD/SX535WD/SX620FW/SX630FW
If you are not sure then please contact us for advice.
This resetter is designed to reset only the newer Epson T1281, T1282, T1283, T1284, T1285 (also known as Epson Fox) and T1291/T1292/T1293/T1294/T1295 (also known as Epson Apple) cartridges. It will reset genuine Epson and most compatibles but we cannot guarantee that it will reset all brands of compatible cartridge due to the many different compatible chips on the market. If you want to purchase this item to reset our own brand cartridges then please contact us for advice before purchase. Please see the compatibility list to make sure that your cartridge part numbers are supported.
This resetter WILL NOT reset older 7 & 9 pin Epson cartridges. If you require a resetter for these then
When resetting chips on genuine Epson T1281, T1282, T1283, T1284, T1285, T1291, T1292, T1293, T1294, T1295 cartridges you will need to reset your cartridges before the ink level goes below around 40% and you will also need to
refrain from tipping the cartridges on their side once removed. This is because, on these new genuine Epson cartridges, there is a sensor behind the chip that is always immersed in the ink. If the cartridge is empty, low or if it is tipped on its side then air will reach the internal sensor which it will render the cartridge permanently unrecognisable after resetting. By resetting the cartridge at above 40% ink and keeping it level you will keep the sensor immersed in ink and therefore stop the cartridge from being rejected.
Our compatible cartridges do not have such a sensor and can be reset when empty or at any point in between.
Genuine and compatible chips can usually be reset many times but as they are manufactured with the intention of being used only once, we cannot guarantee any cartridges or chips beyond their intended single use life span.